I read in the manual that (due to the USB power requirements), it has some constraints on the headphones and microphones it support. Good thing that at least you have a working solution. If you're on a Mac, I don't know how the mixer shows the information there.Įdit: Ok, I see you got another mic working. If it acts as a soundcard visible from Windows, you should check the windows mixer to see if there is a DDJ Ergo soundcard, and use the mixer (or recording properties) to make it work. And not compatible with 64bit applications, for whatever reason they found logical. (It's a bit strange that it includes a driver, that looks more like an in-house ASIO4All than a soundcard driver. I don't know what kind of setup it requires, but it seemed that it was made to be paired with the included software, and that when used with other software, it only acts as a controller. (and for whatever reason, they thought that adding an AC adapter was too costly, even though it barely works with the current that the USB provides) Concretely, most of the controls including the mic volume on top (not the one next to the connector) send MIDI messages to the program. Have you seen the manual? Especially page 8 that shows the connectorsĪnd searching in google images for Shure M58, there's an image showing an XLR to 1/4th I believe you will need to get support from where you bought this hardware, because the question is more complex than what it would logically be.Ĭoncretely, from the manual I understand that this hardware is both, acting as a soundcard, and acting as a MIDI controller.Thanks for the tips, i have resolved my issue, seems to be with the Shure M58 mic, i went and bought a cheap nexxgen from the source AKA Radio Shack for like 29.99$ left settings unchanged, plugged it in, works like a charm, maybe its an issue with the Shure M58 mic. Studio condenser mics require phantom power, but the SM58 is dynamic, not a condenser. All studio/performance microphones use a low impedance balanced (3-wire) XLR connection. Quote from: DVDdoug on 18:22:56 It should be compatable, but a 1/4" phone connector is unusual for a microphone. If you try another microphone, make sure it's a "pro style" mic with an XLR connector, not a "computer mic". Try plugging the mic into a different mixer or preamp, try a different microphone, etc. Are you getting any analog sound at all?Īre you using the analog output from the controller, or only the computer?Īfter trying the easy stuff like wiggling wires & connections and playing with switches & controls, the best way to troubleshoot is to swap things around. Do you have another mic cable to try-out?Ĭables & connectors (and computers ) are the least reliable things. The SM57/58 has a reputation of being very reliable, so it's unlikely to be the problem. Maybe you have the wrong adapter (or cable)? It should be an XLR to TRS (3-terminal) adapter (or cable). It should be compatable, but a 1/4" phone connector is unusual for a microphone.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |